Virtual keyboard won't appear

All Categories / Devices and Accessories, General Troubleshooting

iOS disables the virtual on-screen keyboard whenever most page turners are connected, because many page turners use a “keyboard” device profile. Disconnecting your device will allow the virtual keyboard to reappear when it is needed, and the devices listed below include an additional hardware workaround that can allow you to use the device and the virtual keyboard at the same time:

AirTurn BT-105 (firmware v1.22 or later) or BT-106, Duo, Quad

After connecting your device via the Bluetooth section of the Settings app, open forScore and tap to activate the text field you’d like to type in. Then, press the red power button. Once that’s done, you should be able to use the virtual keyboard and still turn pages normally. Be aware that pressing the virtual keyboard’s “hide” button in the lower right-hand corner will undo this workaround, and you’ll need to repeat these steps to continue to use the virtual keyboard. For a video demonstration of this feature, visit AirTurn’s website.

AirTurn PED (if used in mode 2 or higher)

After connecting your device via the Bluetooth section of the Settings app, open forScore and tap to activate the text field you’d like to type in. Then, press the keyboard button on the PED device. Once that’s done, you should be able to use the virtual keyboard and still turn pages normally. Be aware that pressing the virtual keyboard’s “hide” button in the lower right-hand corner will undo this workaround, and you’ll need to repeat these steps to continue to use the virtual keyboard. If possible, use the AirTurn PED in mode 1 to connect via Bluetooth Smart and avoid this issue entirely.

PageFlip Firefly, Butterfly, Dragonfly, and Cicada revision 4 or later

After connecting your device via the Bluetooth section of the Settings app, open forScore and tap to activate the text field you’d like to type in. Then, press the currently selected mode button (the button with the blinking red light below or next to it). Once that’s done, you should be able to use the virtual keyboard and still turn pages normally. Be aware that pressing the virtual keyboard’s “hide” button in the lower right-hand corner will undo this workaround, and you’ll need to repeat these steps to continue to use the virtual keyboard. Note: Earlier revisions of the PageFlip Cicada do not have any way to toggle the virtual keyboard. If you have an early model of the Cicada, consider updating to a newer PageFlip model.

IKMultimedia iRig BlueTurn

After connecting your device via the Bluetooth section of the Settings app, open forScore and tap to activate the text field you’d like to type in. Press and hold the left (“up” arrow) pad for three seconds to activate the virtual keyboard. Once that’s done, you should be able to use the virtual keyboard and still turn pages normally until you repeat these steps or power cycle your BlueTurn.

Mark as helpful. 104